The internal volume of DZF-6010 vacuum drying oven is 8L. It is a small vacuum drying oven. It can dry heat-sensitive, easily decomposed and easily oxidized substances. DZF-6010 vacuum drying oven is to dry the materials to be dried under vacuum conditions. It uses a vacuum pump to dehumidify and extract air, so that a vacuum state or close to a vacuum state is formed in the working room, thereby reducing the boiling point of water, and using some heating measures to speed up the drying speed. The air duct for forced cooling and ventilation is designed in the interlayer of the vacuum drying oven.
The air duct is mainly used to forcibly cool the inner wall of the oven. The water vapor in the oven will quickly produce condensed water when it contacts the colder inner wall. A condensate water diversion tank is designed inside the oven. The terminal water outlet of the condensed water diversion tank is directly connected to the vacuum port for discharge, which greatly reduces the secondary generation of water vapor by the condensed water inside the oven. An airflow splitter is installed at the air inlet of the oven, so that the airflow entering the oven does not directly contact the material, and the condensed water on the inner wall of the oven can be quickly blown to the condensed water diversion tank. The heating rack in the oven is movable and can be quickly removed to clean the internal residues.
DZF-6010 vacuum drying oven Grouped equipment:
2XZ-2 rotary vane vacuum pump
2XZ-2 rotary vane vacuum pump is the basic equipment used to pump out gas from sealed containers. The small-diameter 2XZ-2 vacuum pump is specially equipped with a vacuum drying box, low-noise design, precise processing, and a specially designed gas ballast valve to prevent the pump oil from mixing with water and prolong the service life of the pump oil. The small-diameter 2XZ-2 vacuum pump is small in size, light in weight, low in noise, and easy to start. It is also equipped with an automatic double anti-oil return safety device and an oil mist filter at the exhaust port. It can be equipped with small-diameter conversion joints, KF interfaces, and flange interfaces.
DZF-6010 vacuum drying oven features:
- Microcomputer temperature controller, accurate and reliable temperature control
- Toughened double-layer glass door, which can be filled with inert gas inside
- Storage, heating and drying can be carried out in an oxygen-free or inert gas environment without causing oxidation
- The shortest heating time, compared with the traditional vacuum drying oven, the heating time is reduced by more than 50%
DZF-6010 vacuum drying oven application:
DZF-6010 vacuum drying oven is widely used in biochemistry, chemical and pharmaceutical, medical and health, agricultural scientific research, environmental protection and other research and application fields, as powder drying, baking and disinfection and sterilization of various glass containers.
|Model||Temp. Range(°C)||Max. Vacuum Degree(Mpa)||Working Temp.(°C)||Chamber Capacity (L)||Inner Dimension (W*D*H,mm)||Overall Dimension (W*D*H,mm)|
1. What are the supporting facilities of DZF-6010 vacuum drying oven?
DZF-6010 vacuum drying oven is generally used with 2XZ-2 rotary vane vacuum pumps, and can also be used with diaphragm pumps, but diaphragm pumps are more expensive than rotary vane vacuum pumps, so rotary vane vacuum pumps are generally used.
2. What are the advantages of DZF-6010 vacuum drying oven?
DZF-6010 vacuum drying oven is made of high-quality steel plate and bullet-proof double-layer temperature-resistant tempered glass. The heat source adopts built-in S-type explosion-proof resistance tube, which is safe and reliable, and the heating time is reduced by more than 50%. The honeycomb heat-conducting window makes the working space evenly heated; Microcomputer temperature controller precisely controls the temperature.