The internal volume of DZF-6050 vacuum drying oven is 55L. It is a small vacuum drying oven. The shape of DZF-6050 vacuum drying oven is horizontal. Surrounding the outdoor heating makes the temperature more uniform, avoiding the contact between organic materials and open flames, which will cause combustion. The temperature setting and control are all intelligent digital display, with the characteristics of accurate temperature control and high precision. The DZF-6050 vacuum drying oven adopts a double-layer vacuum glass door, which increases the heat preservation performance, reduces the fogging of the observation window, and can observe the dried items more clearly. It is suitable for tertiary institutions, scientific research, factories and mines to dry and heat treat items under vacuum conditions. The drying temperature is reduced, some items are avoided from being heated and oxidized, and no dust particles are damaged.
DZF-6050 vacuum drying oven Grouped equipment:
2XZ-4 rotary vane vacuum pump
2XZ-4 rotary vane vacuum pump is suitable for DZF-6050 vacuum drying oven. 2XZ-4 rotary vane vacuum pump is small in size, cheap in price, high in vacuum degree, low in noise and easy to use. Equipped with noise reduction device and gas ballast valve, which can remove a small amount of water vapor, and the exhaust port is equipped with oil mist collector to avoid environmental pollution. The 2XZ-4 rotary vane vacuum pump can operate continuously for a long time under the condition that the ambient temperature is within the range of 5°C-40°C, the relative temperature is not more than 90%, and the inlet pressure is less than 1333Pa. The 2XZ-4 rotary vane vacuum pump can be started at one time with the atmosphere or any vacuum degree.
DZF-6050 vacuum drying oven features:
- Large-screen LCD display, multiple sets of data displayed on one screen, menu-style operation interface, easy to understand and easy to operate.
- The aluminum shelf stamped by special process has high temperature non-oxidation and fast heat conduction. Minimize heat loss
- The cuboid studio makes the effective volume utilization rate large, and the microcomputer temperature controller ensures accurate and reliable temperature control.
- The toughened double-layer glass door is convenient for observing the dryness of the items in the working room, and can fill the interior with inert gas.
DZF-6050 vacuum drying oven application:
The vacuum drying oven is an environmental test equipment specially designed for drying easily oxidized, easily decomposed, heat-sensitive substances and items with complex components. The setting, display and control of the temperature are realized by an intelligent digital temperature regulator. In general, the vacuum drying oven should meet the following conditions of use: relative humidity ≤ 85%; temperature 5 ~ 40 ℃; power supply voltage AC220V ± 10%, and the entire working environment is free of corrosive gases and strong vibrations.
|Model||Temp. Range(°C)||Max. Vacuum Degree(Mpa)||Working Temp.(°C)||Chamber Capacity (L)||Inner Dimension (W*D*H,mm)||Overall Dimension (W*D*H,mm)|
What is the drying principle of DZF-6050 vacuum drying oven?
Vacuum treatment technology is to reduce the boiling point of water by placing the material in a vacuum environment. Under the action of pressure difference, the water molecules inside the material diffuse to the surface. It is pumped away and discharged, so as to realize the drying of materials at normal temperature or even low temperature.
What should I do if the vacuum of the DZF-6050 vacuum drying oven cannot be pumped?
One is to check whether the air release valve on the panel is closed, if it is not closed, just close the air release valve; the other is to check whether the rubber ring of the box door is damaged, if damaged, it is recommended to replace the door sealing ring; third is to check whether the vacuum pump is Damaged, if damaged, it is recommended to replace the vacuum pump; Fourth, check whether the suction pipe of the vacuum pump is connected normally, if it is not connected, just connect it as required;