F-100L glass reactor system is a large-capacity glass reactor produced by ZZKD, with a maximum capacity of 100L. It is a testing and production equipment for synthetic chemicals, biopharmaceuticals and new material preparation. The glass reactor system can carry out stirring reaction under normal pressure or negative pressure according to the requirements of use. According to the required reaction temperature, select different temperature control media to carry out reflux and distillation of the reaction solution. The temperature measurement accuracy is high and the error is small. ,high working efficiency.
Glass reactor system supporting equipment:
1. DLSB-50/80℃ low temperature coolant circulation pump.
DLSB-50/80°C Low Temperature Coolant Circulating Pump The low temperature coolant circulating pump is a common experimental instrument in the laboratory. It helps provide cooling for various equipment and has many uses. The maximum capacity of the DLSB-50/80°C low-temperature coolant circulation pump is 50L, and the minimum temperature can reach -80°C, which can meet most of the operating environments. If you have other more severe experimental environmental conditions, special models can be customized for you.
2. SHZ-C circulating water vacuum pump.
The vacuuming principle of the SHZ-C circulating water multi-purpose vacuum pump is different from that of the jet type air extractor, and it is still a centrifugal mechanical pump. When the impeller rotates, the working water forms a water ring that swirls along the pump casing under the action of centrifugal force. The water ring moves relative to the blades, so that the space volume between two adjacent blades changes periodically. You can choose double-meter double-tap or four-meter four-tap.
Features of glass reactor system:
The glass reactor system is heated by water, oil bath or electric heating mantle, directly heating the reactor body, so that the reaction temperature of the material is constant, and agitation can be provided. Various biochemical synthesis reactions can be carried out under constant temperature conditions, and reflux, distillation or extraction reactions can also be performed at different temperatures. The ball bottle reaction container can make the same stirring form produce more sufficient stirring effect.
- PTEE sealing material is used, which has strong sealing, anti-corrosion and wear resistance.
- Electronic stepless speed regulation, stable operation.
- Intelligent temperature sensor, digital display temperature.
- The large-diameter discharge valve can hold solid and liquid materials, and it can be disassembled to facilitate the discharge of solid materials. Eliminate liquid leakage and poor feeding.
- Double reflux, integrated standard port condenser, distillation, reflux and extraction can all be carried out.
- The main structure is made of stainless steel and aluminum alloy, and the whole set of glass is made of high borosilicate glass, which has good chemical and physical properties, wear resistance and corrosion resistance.
Application of glass reactor system:
1. Stirring reaction
The glass reactor system is circulated through the agitator, so that the gas, liquid and even suspended particles in the solution can be mixed evenly. By adding different liquids or substances and stirring, the mixing is more thorough and the liquids are prevented from evaporating and refluxing.
2. Purification reaction
As an important chemical method, purification not only plays an important role in chemical research, but also plays a very important role in chemical production. The glass reactor system goes through a series of steps to extract the pure liquid and the desired material.
3. High temperature reaction
“High temperature” means that the temperature must be very high when this reaction occurs. The glass reactor system has good chemical and physical properties, wear resistance and corrosion resistance, so that many experiments can be carried out normally.
Parameter
Single layer glass reactor
| Model | Stirring Power(W) | Stirring Speed(rmp) | Heating Power(kW) | Capacity(L) | Temperature Using Range(℃) | Motor Torque(g/cm) |
| F-1L | 60 | 0~1000 | 0.5 | 1 | RT-250/RT-350 | 2000 |
| F-2L | 60 | 0~1000 | 0.8 | 2 | RT-250/RT-350 | 2400 |
| F-3L | 60 | 0~1000 | 1.2 | 3 | RT-250/RT-350 | 2400 |
| F-5L | 60 | 0~1000 | 1.5 | 5 | RT-250/RT-350 | 4800 |
| F-10L | 120 | 60~600 | 3 | 10 | RT-250/RT-350 | 1000 |
| F-20L | 120 | 60~600 | 4.5 | 20 | RT-250/RT-350 | 1200 |
| F-30L | 120 | 60~600 | 6 | 30 | RT-250/RT-350 | 1200 |
| F-50L | 120 | 60~600 | 7 | 50 | RT-250/RT-350 | 1500 |
| F-100L | 180 | 60~600 | 9 | 100 | RT-250/RT-350 | 3000 |
Jacketed glass reactor
| Model | Power(W ) | Stirring Speed(rmp) | Diameter | Capacity(L) | Power Supply | Motor Torque(g/cm) |
| S-1L | 60 | 0~600(Max.1300) | 12 | 1 | 220V 50/60 Hz | 2000 |
| S-2L | 60 | 0~600(Max.1300) | 12 | 2 | 220V 50/60 Hz | 2400 |
| S-3L | 60 | 0~600(Max.1300) | 12 | 3 | 220V 50/60 Hz | 2400 |
| S-5L | 60 | 0~600(Max.1300) | 12 | 5 | 220V 50/60 Hz | 4800 |
| S-10L | 120 | 0~600(Max.1300) | 12 | 10 | 220V 50/60 Hz | 1000 |
| S-20L | 120 | 0~600(Max.1300) | 12 | 20 | 220V 50/60 Hz | 1200 |
| S-30L | 120 | 0~600(Max.1300) | 12 | 30 | 220V 50/60 Hz | 1200 |
| S-50L | 120 | 0~600(Max.1300) | 12 | 50 | 220V 50/60 Hz | 1500 |
| S-100L | 250 | 0~600(Max.1300) | 15 | 100 | 220V 50/60 Hz | 3000 |
FAQ:
1. How about the sealing effect of the glass reactor system?
The 100L glass reactor system adopts PTFE long-term sealing polytetrafluoroethylene composite seal, which has strong sealing, corrosion resistance and wear resistance, ensuring high-precision sealing under working conditions.
2. Can the glass reactor system be used for both high temperature and low temperature reactions?
The glass reactor system is heated by water, oil bath or electric heating mantle, and directly heats the reactor body to keep the material reaction temperature constant. It can also be connected to a low-temperature medium for reaction experiments and production under low-temperature conditions. According to customer needs, optional electric heating jacket heating or optional cooling coil.
3. The glass reactor system I used before had a lot of noise and unstable operation. Is your equipment also like this?
The main structure of our glass reactor system is made of stainless steel and aluminum alloy, and the whole set of glass is made of high borosilicate glass, which has good chemical and physical properties, wear resistance and corrosion resistance. Equipped with AC induction servo motor and electronic stepless speed regulation, stable operation, large torque, automatic boost, no spark, long life.
